The module can be inserted into both the central frame and the extension frame. It supports CAN 2.0A (11 bit) and CAN 2.0B (29 bit) telegrams with a freely selectable transmission rate of 10 kbit/s to 1 Mbit/s.

The CAN 300 PRO can send and receive CAN telegrams in Layer 2 operating mode. In the CANopen® Master operating mode, the data from the CANopen® slaves can be processed as a process image in the PLC.

Application as a CANopen® slave is also possible. For standard applications such as B. Motor control with CANopen®, application examples are available. Handling blocks for the SAE J1939 protocol are also available.

There are 16 freely adjustable timers available in the CAN 300 PRO. Each timer can trigger a freely programmable CAN telegram. This means that the synchronous protocols that are widely used in drive and servo control can also be easily implemented via the CAN 300 PRO.

A DIP switch for setting the transmission rate and the station address makes commissioning easier. An optional micro memory card saves the project. This means that the parameterization or the module can be replaced quickly in the event of service.

6 LEDs show the operating status of the module. A USB interface is available for diagnostics and parameterization.

The CAN 300 PRO also works in the extended ambient temperatures of -25 °C to +60 °C.

A USB programming cable is included.