For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
Performance Data |
|
| Supply voltage | +24 V DC (+18-30 V DC) |
IEPE Interfaces |
|
| Type | IEPE interface |
| Amount | 4 |
| Measurement range | ±0.172 … ±5.5 V AC |
| Resolution | 16 bits |
| Conversion rate/channel | ≥ 5 µs (adjustable, default setting 5 µs) |
| Data recording/channel | maximum 64 Word |
| Short-circuit proof, current limited | Yes |
| Cable break monitor | Yes |
| Hardware filter | typically 31 MHz (high pass 1st order), typically 20 kHz (low pass 3rd order) |
Software Band Pass Filter |
|
| Lower frequency limit | adjustable (minimum 0.1 Hz) |
| Upper frequency limit | adjustable (maximum 10 kHz) |
| Processed measured values/cycle | configurable |
| Output parameters | Average Value, Minimum Value, Timestamp, Minimum Value, Timestamp, Maximum Value |
Sensor Supply |
|
| Adjustable current | 0, 4, 8, 12 mA individually adjustable for each channel |
| Supply voltage | +18-30 V DC |
| Sensor voltage | typically 19.1 V DC |
Mechanical Features |
|
| Dimensions | 12.5 x 104 x 72 mm (W x H x D) |
| Protection type | IP20 |
Article Number/Certification |
|
| Article number | 20-009-040 |
| Standardization/certification | UL 508 (E247993) |
Reviews
There are no reviews yet.