For the DC 062, AKM low-voltage servo motors are available. For simple control cabinet integration of the S-DIAS system, EPLAN Macros are provided.
For the DC 062, AKM low-voltage servo motors are available. For simple control cabinet integration of the S-DIAS system, EPLAN Macros are provided.
Performance Data |
|
| Supply voltage | +24 V DC (+18-30 V DC) |
| Voltage monitor | Yes |
Digital Inputs |
|
| Type | Enable |
| Number | 2 |
| Input voltage | +24 V DC (+18-30 V DC) |
| Input current | 3 mA at +24 V DC |
| Input delay | typically 0.5 ms |
Incremental Encoder Input |
|
| Number | 1 |
| Input signals | Incremental encoder signals RS422 (A, /A, B, /B, R, /R)
RS422-signal (120 Ω termination) Incremental encoder signals TTL (A, B, R) TTL-level (1200 Ω Pull-Up) |
| Input frequency | maximum 125 kHz |
| Counter frequency | maximum 500 kHz |
| Resolution | maximum 16 bits |
| Signal analysis | 4-port |
| Power supply | +5 V DC/0.2 A short-circuit proof |
Motor Driver |
|
| Type | brushless, 4-quadrant regulator with position setting |
| Max. continuous current | 6 A |
| Max. peak current (10 sec) | 15 A |
Holding Brake |
|
| Output voltage | +24 V DC |
| Max. continuous current | 500 mA |
| Short-circuit protection | Yes |
Regen Resistor |
|
| Type | external power resistor |
| Output | GND switching |
| Max. Current | 10 A |
| Short-circuit protection | Yes |
Mechanical Features |
|
| Dimensions | 12.5 x 104 x 72 mm (W x H x D) |
| Protection type | IP20 |
Article Number/Certification |
|
| Article number | 20-014-062/-X |
| Standardization/certification | UL 508C (E336350) |
Reviews
There are no reviews yet.