For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
Analog Inputs |
|
| Type | ±10 V DC resp. potentiometer 0-100 % |
| Number | 4 |
| Resolution | 16 bits |
| Measurement range | -10 V … +10 V or 0 … 100 % (potentiometer) |
| Measurement precision | ±0.3 % of maximum measurement value
or ±0.35 % of the maximum value |
| Conversion time for all channels | Speed mode: 200 µs |
| Cable break monitor | Yes |
| Hardware filter | typically 1 kHz, low pass 3rd order |
| Software filter | configurable, low pass 1st order |
Analog Outputs |
|
| Type | standard |
| Number | 4 |
| Output range | -10 V … +10 V |
| Resolution | 12 bits |
| Refresh time for all channels | ≥ 500 μs (corresponds to the S-DIAS cyclic time) |
| Output voltage capacity | > 5 kΩ |
| Settling time | 50 µs (63 % of the end value)
100 µs (86 % of the end value) 250 µs (99 % of the end value) |
| Accuracy | ±0.5 % of maximum output value |
Reference Output |
|
| Number | 1 |
| Reference voltage | +10 V DC |
| Allowable output current | maximum 10 mA (< HW version 3.5), maximum 16.7 mA (≥ HW version 3.5) |
| Short-circuit proof, current limited | Yes |
| Accuracy | ±0.5 % |
Mechanical Features |
|
| Dimensions | 12.5 x 104 x 72 mm (W x H x D) |
| Protection type | IP20 |
Article Number/Certification |
|
| Article number | 20-017-441 |
| Standardization/certification | UL 508 (E247993) |
Reviews
There are no reviews yet.