Description

• Physical Port
  • 16-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function
  • 2 SFP slot interfaces, supporting 100/1000BASE-X SFP transceiver type auto detection
  • 1-port RJ45 console interface for basic management and setup

   

  Industrial Case and Installation

  • • Dual power input, redundant power with reverse polarity protection

  – DC 12 to 48V input or AC 24V input

  – Active-active redundant power failure protection
  – Backup of catastrophic power failure on one supply
  – Fault tolerance and resilience
  • IP30 metal case
  • DIN-rail and wall-mount designs
  • Supports ESD 6KV DC Ethernet protection
  • Supports -40 to 75 degrees C operating temperature
  • Free fall, shock-proof and vibration-proof for industries

   

  Switching

  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 8K MAC address table size
  • 10K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

   

  Layer 2 Features

  • • Supports VLAN

  – IEEE 802.1Q tagged VLAN

  – Up to 256 VLAN groups, out of 4096 VLAN IDs
  – Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
  – Private VLAN (Protected port)
  – Protocol-based VLAN
  – Voice VLAN
  – GVRP
  • • Supports Spanning Tree Protocol

  – IEEE 802.1D Spanning Tree Protocol (STP)

  – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
  – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
  – BPDU Guard
  • • Supports Link Aggregation

  – IEEE 802.3ad Link Aggregation Control Protocol (LACP)

  – Cisco ether-channel (static trunk)
  – Up to 8 trunk groups
  – Up to 8 ports per trunk group with 16Gbps bandwidth
  • Provides port mirror (many-to-1)
  • IPv6 MAC/VLAN/Multicast Address Table
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)

   

  Quality of Service

  • • Ingress/Egress Rate Limit per port bandwidth control
    • Support 8 priority queues on all switch ports
    • Traffic classification

  – IEEE 802.1p CoS

  – IP TOS/DSCP/IP precedence of IPv4/IPv6 packets
  – IP TCP/UDP port number
  – Typical network application
  • DSCP remarking

   

  Multicast

  • Supports IPv4 IGMP snooping v1, v2, v3
  • Supports IPv6 MLD snooping v1, v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering

   

  Security

  • • Storm Control support

  – Broadcast/Multicast/Unicast

  • • Authentication

  – IEEE 802.1X port-based network access authentication

  – Built-in RADIUS client to cooperate with the RADIUS servers
  – DHCP Relay and DHCP Option 82
  • • – RADIUS/TACACS+ users access authentication

     

    • Access Control List

  – IPv4/IPv6 IP-based ACL

  – IPv4/IPv6 IP-based ACE
  – MAC-based ACL
  • • – MAC-based ACE

     

    • MAC Security

  – Static MAC

  – MAC filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder

   

  Management

  • • IPv4 and IPv6 dual stack management
    • Switch Management Interface

  – IPv4/IPv6 Web switch management

  – Console and telnet Command Line Interface
  – SNMP v1 and v2c switch management
  • • – SSHv2, TLSv1.2 and SNMP v3 secure access

     

    • IPv6 IP address/NTP/DNS management
    • Built-in Trivial File Transfer Protocol (TFTP) client
    • Static and DHCP for IP address assignment
    • System Maintenance

  – Firmware upload/download via HTTP/TFTP

  – Hardware reset button for system reboot or reset to factory default
  – Dual images
  • • User Privilege levels control
    • Network Time Protocol (NTP)
    • Link Layer Discovery Protocol (LLDP) and LLDP-MED
    • Syslog remote alarm
    • SNMP Management

  – SNMP trap for interface link up and link down notification

  – Four RMON groups (history, statistics, alarms and events)
  • • PLANET Smart Discovery Utility for deployment management
    • Network diagnostic

  – SFP-DDM (Digital Diagnostic Monitor)

  – Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  – ICMPv6 / ICMPv4 remote pin