CTI
I/O Systems
Products Overview
The SIGMATEK I/O Systems open all possibilities – whether in the control cabinet or directly in the field. DIAS stands for “Distributed Automation System”. All series, S-DIAS (IP20), P-DIAS (IP67) and X-DIAS (IP20) have a very high package density, are simple to use and can be flexibly combined.
P-DIAS
No products were found matching your selection.
S-DIAS
DI 205 –
20 digital inputs (GND-switching/3 mA) Input delay: 5 ms Pull-up voltage +24 V DC Input to mass (though transistor, switch, relay) Switch open: signal status "0", switch closed: signal status "1" For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
DM 046 –
4 digital short-circuit proof and back-readable outputs (+24 V DC/1.7 A) Usage as input (+24 V DC/3.7 mA) Input delay: 0.5 ms For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
DM 081 –
4 digital inputs (+24 V DC/3.7 mA) Input delay: 5 ms 4 digital short-circuit proof outputs (+24 V DC/0.5 A) For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
DM 108 –
4x digital inputs (+24 V/3.7 mA) 4x short circuit proof digital outputs (+24 V/0.5 A) input delay: 5 ms For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
DM 161 –
8 digital inputs (+24 V DC/3.7 mA) Input delay: 5 ms 8 digital short-circuit proof outputs (+24 V DC/0.5 A) For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
DM 162 –
4 digital inputs (+24 V DC/3.7 mA) Input delay: 5 ms 4 digital inputs with counter function and time measurement (+24 V DC/3.7 mA) Input delay: 1 µs 8 digital short-circuit proof outputs (+24 V DC/0.5 A) For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
DM 167 –
8 digital inputs (+24 V DC/3.7 mA) Input delay: 5 ms 8 digital short-circuit proof outputs (+24 V DC/1.7 A) Primary and secondary side of the out and inputs are separated by optic couplers. For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
DM 811 –
Absolute pressure input PT100 temperature input 8 digital inputs (+24 V DC/3.7 mA/0.5 ms) For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
DM 822 –
2 differential pressure inputs (12 bits) Measurement range from -2068 to +2068 mbar 8 digital inputs (+24 V DC/3.7 mA/0.5) For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
EC 121 EtherCAT
EtherCAT S-DIAS Control Module with voltage supply for up to 32 S-DIAS modules 34 S-DIAS modules with PSB 001 Data exchange between EtherCAT and S-DIAS-Bus For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
EE 121-1 –
3 voltage inputs Range 0-520 V AC 12 current inputs Range 0-2 A AC Power grid synchronization For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
EZ 101 –
10 digital inputs (+24 V DC/6.9 mA) for implementing the Euromap interface Input delay: 5 ms For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
EZ 102 –
10 digital short-circuit proof outputs (+24 V DC/100 mA) for implementing the Euromap interface For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
FC 021 –
2 digital RS422 inputs with counter function 2 digital TTL inputs with counter function galvanically separated 2 digital HTL inputs with counter function galvanically separated For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
ICA 011 Interface
1x CAN Termination of the CAN bus via soft or hardware For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
ICA 012 –
1x CAN Termination of the CAN bus via soft or hardware For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
IIO 041 –
4x SDCI ports (Single-Drop Digital Communication Interface) according to IEC 61131-9 (IO-Link) Enables the connection of up to 4 intelligent SDCI sensors or SDCI actuators All SDCI ports can also be configured as +24 V digital inputs or +24 V digital outputs Additionally 4 digital inputs (+24 V DC/3.7 mA) Input delay: 0.5 ms For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
IO 011 –
6 digital inputs (+24 V DC/3.7 mA) Input delay: 0.5 ms 8 digital short circuit proof outputs (+24 V DC/0.5 A/backreadable) 1 analog input (±10 V DC/16 bits) 1 analog current input (0-20 mA resp. 4-20 mA/16 bits) For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
IO 011S –
6 digital inputs (+24 V DC/3.5 mA) Input delay: 1 µs 8 digital short circuit proof outputs (+24 V DC/0.5 A/backreadable) 1 analog input (±10 V DC/16 bits) 1 analog current input (0-20 mA resp. 4-20 mA/16 bits) For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
IPN 021-1 –
1x Profinet Slave I/O In* 1x Profinet Slave I/O Out* According to Profinet I/O specification V2.3 Profinet identification parameters configurable * Industrial Mini I/O
IPN 021 –
1x Profinet Slave I/O In* 1x Profinet Slave I/O Out* According to Profinet I/O specification V2.3 * Industrial Mini I/O For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
ISE 021 –
1x RS232 (2x RS232, switchable via software) 1x RS485 No external +24 V DC supply required For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
ISE 031 –
1x RS232 (2x RS232, switchable via software) 1x RS485 1x TTY For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
KL 090 –
Connection for +24 V DC supply with GND Supply distributed over 9 out-going +24 V DC supplies with GND 4 supply groups Electronic short-circuit protection Current limited For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.